Health and Safety Risk Assessment of the Pulping Unit at Golestan Persia Paper Mill within the Framework of the HSE Management System

Document Type : Original Article

Authors

1 . Master of Environmental Planning, Department of Environmental Sciences, Faculty of Fisheries and Environmental Sciences, Gorgan University of Agricultural Sciences and Natural Resources, Iran

2 assistant professor of environmental sciences- Gorgan university

3 Department of Environmental Sciences, Faculty of Fisheries and Environmental Sciences, Gorgan University of Agricultural Sciences and Natural Resources, Iran

10.22034/envj.2026.593672.1660
Abstract
Background and Objectives: Occupational health and safety are fundamental components of industrial management and essential requirements for protecting human, material, and organizational assets. Neglecting these aspects can lead to adverse and irreversible human, economic, and environmental consequences. Accordingly, within the framework of sustainable development, the implementation of an integrated Health, Safety, and Environment (HSE) management system, emphasizing the systematic identification of hazards, assessment of associated risks, and determination of appropriate control measures, is of particular importance.In this regard, pulping units in paper mills are exposed to a wide range of occupational health and safety hazards due to the nature of their operational processes, including pulp preparation and refining, the use of mechanical and electrical equipment, operation of pulpers and conveyor belts, and handling of process materials and waste. These hazards include entanglement in or contact with moving machinery, electric shock, fire, exposure to noise and vibration, contact with process materials and waste, and musculoskeletal disorders resulting from manual material handling. The identification and assessment of these hazards provide a basis for prioritizing risks and developing control measures appropriate to operational conditions. Accordingly, the present study was conducted to identify and assess occupational health and safety risks in the pulping unit of Golestan Persia Paper Mill, determine corrective measures, and estimate residual risk levels using the Preliminary Hazard Analysis (PHA) method.
Materials and Methods: This descriptive-analytical study was conducted using an applied research approach. Initially, occupational health and safety hazards in the pulping unit were identified through field observations, process reviews, interviews with employees and HSE experts, and an examination of technical documentation. Subsequently, the Preliminary Hazard Analysis (PHA) method, as a semi-quantitative risk assessment technique, was employed to evaluate the identified risks. In this method, the risk level associated with each hazard was determined based on two parameters: consequence severity and likelihood of occurrence. Following the scoring of these parameters, a qualitative risk assessment matrix was used to classify risks into low, medium, and high categories. Subsequently, appropriate control and corrective measures were proposed according to the nature of each hazard and in accordance with the hierarchy of controls, including hazard elimination or substitution, engineering controls, administrative measures, and the use of personal protective equipment (PPE). Finally, a secondary risk assessment was conducted to evaluate the effectiveness of the proposed measures, and changes in risk levels were analyzed.
Results and Conclusion: Based on the initial risk assessment, a total of 36 occupational health and safety hazards were identified in the studied unit. Of these, 3 were classified as high risk, 25 as medium risk, and 8 as low risk. The most significant high-risk hazards included fire resulting from welding operations near conveyor belts and electric shock in the pulper section and electrical panels. The results of the reassessment, assuming the effective implementation of the proposed corrective measures, indicated that the number of hazards with an estimated high residual risk decreased to zero, while the distribution of residual risk comprised 6 medium-risk hazards and 30 low-risk hazards. These findings demonstrate the potential of the proposed control measures to reduce residual risk levels in the pulping unit. However, confirmation of actual risk reduction and the effectiveness of these measures requires their implementation and subsequent monitoring of operational conditions. The findings emphasize the importance of systematic hazard identification, risk prioritization, and the development of control programs tailored to the specific operational conditions of the pulping unit.

Keywords

Subjects


Articles in Press, Accepted Manuscript
Available Online from 16 November 2026